电镀生产线的PLC控制系统设计.doc

┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 装 ┊ ┊ ┊ ┊ ┊ 订 ┊ ┊ ┊ ┊ ┊ 线 ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ PAGE 电镀生产线的PLC控制系统设计 [摘要] 随着现代工业和技术的发展，电镀在机械、电子、仪器仪表、轻工、地质、交通运输和国防工业等生产部门的应用日益广泛,与人们的日常生活也有十分密切的关系。 现代市场竞争日趋激烈，企业迫切需要提高生产效率和产品质量，于是如何提高电镀生产线的自动控制性能，减少成本具有重要的意义。 本文以镀锌电镀自动生产线控制系统设计为目标，对其电镀的工艺要求和控制要求进行了分析，结合企业的实际情况，开发了一套基于触摸屏与PLC的电镀生产线的自动控制系统，提出了设计方案，然后对该生产线控制系统的硬件部分进行了设计。在对电镀控制系统的设计中，针对于电镀生产线上行车运行不平稳，定位不精确等问题提出了解决的方法。 本次设计以三槽电镀生产线为例，在设计中运用到了可编程控制器PLC基础知识、自动控制、电动机、电气控制以及电力电子等多门技术，并且对这些技术进行综合应用。 [关键词] 可编程控制器 触摸屏 电镀 控制系统 变频器 Design of Electroplate Production Line Control System Based on PLC [Abstract] With the development of modern industry and technology,electroplating has been widely used in machinery,electronic,instrument,light industry,geology,transpo -tation,and national defense industry and it is also very close to the common life of peop- le. Due to the acute competition of the market,the production efficiency and product quality must be enhanced.So,it is significant to enhance the control performance of electroplating production line and reduce production cost. This paper analyzes technological and control requirements combined with practical situation on the basis of design of zinc plating automatic production line.The control system of automatic production line was also designed based on touch screen and PLC.The design scheme was also proposed in detail.Then,the hardware part of production line control system was designed especially focused on the unstable sliding of driving and imprecision of location. This design take three slots electroplate production line as an example ,which makes use of the automatic control, electric motor, the electricity control, programmable controller PLC and the electric power electronics，and apply these techniques. Comprehensively. [Key words] Electroplating PLC Touch screen Control the system Inverter 目录 TOC \o 1-3 \h \z \u 第1章 绪论 1 1.1国内外电镀自动线现状及发展水平 1 1.2电镀生产线实现自动控制的意义 2 1.3国内电镀行车控制问题 3