ACS712电流传感器说明书.pdfVIP

ACS712 Fully Integrated, Hall Effect-Based Linear Current Sensor with 2.1 kVRMS Voltage Isolation and a Low-Resistance Current Conductor Features and Benefits Description ▪ Low-noise analog signal path The Allegro® ACS712 provides economical and precise ▪ Device bandwidth is set via the new FILTER pin solutions for AC or DC current sensing in industrial, automotive, ▪ 5 µs output rise time in response to step input current commercial, and communications systems. The device ▪ 50 kHz bandwidth package allows for easy implementation by the customer. ▪ Total output error 1.5% at T = 25°C, and 4% at –40°C to 85°C A Typical applications include motor control, load detection and ▪ Small footprint, low-profile SOIC8 package ▪ 1.2 mΩ internal conductor resistance management, switched-mode power supplies, and overcurrent ▪ 2.1 kV minimum isolation voltage from pins 1-4 to pins 5-8 fault protection. RMS ▪ 5.0 V, single supply operation The device consists of a precise, low-offset, linear Hall ▪ 66 to 185 mV/A output sensitivity sensor circuit with a copper conduction path located near the ▪ Output voltage proportional to AC or DC curre