毕业设计（论文）-轴承座复合模设计.doc

轴承座冲压模具设计 2018届机械专业毕业设计（论文） PAGE I 摘 要 本次是轴承座制件的设计，分析制件的材质问题、大致结构和尺寸的标注精度。制件设计使用的材质是.08F钢。轴承座的外形属于完成对称，制件的料厚为2mm, 轴承座为落料拉深件，因为拉深的高度比较高，所以需要多次拉深才能完成成形。所以轴承座可以采用常用的复合冲裁模和单工序模来完成生产。 在进行设计之前需要对轴承座进行分析，分析可以知道轴承座为比较规则落料拉深件。还要对材料进行分析，分析材料的精度是否能够使用生产工艺进行生产。然后分析模具的结构问题，由于工件只有落料拉深的工序，可以采用单工序模或者复合模来完成生产。两种方案总要分析采用哪一种比较好，哪一种最适合生产，经过一系列的比对之后确定采用多个模具来完成制作，因为拉深的次数比较多，采用一个模具的话会比较紧凑，不容易实现生产，而且精度也不容西保证。所以要想生产就要采用多副模具。 经过对轴承座复合模设计，不但能熟练的对设计和理论知识进行掌握，还能提高利用各种资源的学习能力。阐述了模具的设计过程和证明轴承座在实际设计制造中的使用的可能性。 关键词：多次拉深，外形对称，模具设计 全套图纸加扣?3012250582 Abstract This is the design of the flanged cylinder parts. The material quality, the general structure and the dimensioning accuracy of the parts are analyzed. The material used in the design of parts is 08F steel. The shape of the cylinder without flange is complete symmetry, the thickness of the workpiece is2mm, and the non flange cylindrical part is the blanking drawing, because the height of the drawing is high, so it is necessary to draw many times to complete the forming. Therefore, the flanged cylinder parts can be produced by using common compound blanking dies and multiple single working modes. Before the design is carried out, it is necessary to analyze the flanged cylinder parts, and we can know that the flanged cylinder parts are the regular blanking drawing parts. It is necessary to analyze the material and analyze whether the accuracy of the material can be produced by the production process. Then the structure problem of the die is analyzed. Because the workpiece only has the blanking and drawing process, the single process mold or compound die can be used to complete the production. The two schemes always want to analyze which one is better, which is the most suitable for production. After a series of comparisons, it is determined to use multiple moulds to complete the production, because the number of deep drawing is much more, the use of a mold will be more compact, not easy to achieve production, and the accuracy is not guaranteed. So