血糖仪的规范使用.ppt

Additional Info: Do not use Test Plug often Frequent use of the Test Plug may wear out the Cable connector Additional Info: Calibration Errors occur when a calibration check does not pass The Calibration check is performed when the user enters a Meter Reading with Cal Yes selected Cal Error will occur if the Sensitivity Factor is above 15 or below 1.5. Sensitivity Factor = Meter BG / ISIG Troubleshooting: Verify that the Meter Reading entered is correct Wash hands before taking a meter reading Replace sensor if alarm persists Record Sensor lot number and verify that it is not expired