- 4
- 0
- 约4.78千字
- 约 12页
- 2019-08-31 发布于广东
- 举报
电厂全厂失电工况润滑油冷却方式 电厂blackout工况润滑油冷却方式 全厂失电工况,循环水中断,开式冷却水泵和闭式冷却水泵停止运行,转子惰转造成润滑油温持续上升。需要提供额外冷却水源防止供油油温超过60℃,防止转子低转速下油膜减薄造成磨损。 During black out, circulating cooling water will be cut down and operation of OCCW and TCS pump will stop, coasting down of turbine rotor will cause temperature increase of lube oil. So additional cooling water is needed to defense oil temperature at outlet of oil cooler exceed 60℃. 电厂blackout工况润滑油冷却方式 目前厂家的意见是全厂失电期间,通过柴油发电机带一台TCS泵运行,减少润滑油温上升。 TCS泵功率较大,为380KW,影响了 柴油发电机设计负荷。电厂业主认为可以使用一台专用小功率冷却泵冷却润滑油,该泵可通过就地柴油机驱动,请厂家和设计院考虑可行性。 Opinion of manufacture is that operating one TCS
原创力文档

文档评论(0)