FFR检测操作及应用指导幻灯片课件.pptVIP

* * * * * This is the kind of pressure tracing that can be obtained. The first step is always to advance the pressure wire up to the tip of the catheter to be absolutely sure that the pressure are superimposed (verification + equalization). Then, the wire is advanced across the stenosis. FFRmyo is calculated from the mean signals from aortic pressure (Pa) and distal pressure (Pd), during maximum hyperemia. FFRmyo = Pd/Pa ? in this case 40 mmHg / 90 mm Hg = 0.44 * It is now possible to obtain this information by passing a pressure measuring guide wire (PressureWire) across a stenotic segmen