水性金属防腐面漆乳液E光泽度优异耐盐雾突出.docVIP

Page PAGE 2 THYOSIL E1560 Acrylic polymer 水性丙烯酸树脂（工业防锈防腐漆） Description描述 Acrylic polymer emulsion recommended for manufacturing primers and glossy topcoats which are designed for commercial, institutional, and industrial maintenance markets. The high gloss capability, corrosion resistance, hardness, and chemical resistance characteristics imparted by THYOSIL E1560 in THYOSIL E1560 可以配制成光泽面漆和底漆，用于工业和商业的防腐防锈漆 。具有高光泽，耐腐蚀，耐化学腐蚀以及高硬度等性能。是终结传统溶剂型防护漆的水性品。 Advantages 特性与优势 Excellent adhesion on metallic substrates.在金属表面具有超强的附着力 No prior metal treatment necessary for application.适用于未经处理的金属表面 Primer formulations exhibit stability with commonly used corrosion-inhibiting pigments. 可以与常用防腐蚀颜料的配方呈现出良好的稳定性 Very good resistance to water and alcohol.具有优良的防水和酒精性能 Typical Properties 典型性质 These properties are typical, do not constitute specifications. Appearance外观 White bluish liquid 白偏蓝乳液 Solids (%) 固含量 41 pH 7.5 Viscosity at 25oC (cP)粘度 500 MFFT (oC) 成膜温度 30 Tg (oC) 玻璃化温度 40 Starting formulations using THYOSIL E1560基础配方 WHITE GRINDING白色色浆的研磨制备 Raw material原料 (%) Water 水 18.05 Dowanol DPM(2)二丙二醇甲醚 1.06 Butyl Glycol 丁基乙二醇 6.54 THYON PH730(1) 树脂溶液 2.89 Aqueous Ammonia (28%) 氨水 0.44 THYOSIL Q561(1) 表面活性剂 0.62 THYOSIL Q202(1) 消泡剂 0.62 TiO2 R-902 (3) 钛白粉 67.63 Water 水 2.15 Total 总计 100.00 (1) : Diransa, (2): Dow, (3): Dupont. Manufacturing instructions加工提示 Mix in the Cowles under high speed stirring water, Dowanol DPM, Butyl Glycol, THYON PH730, Aqueous ammonia, THYOSIL Q561, THYOSIL Q202. 先将水， DPM,丁基乙二醇，树脂液，氨水，Q561，Q202放入釜内高速搅拌。 Slowly add TiO2, keep under stirring for 15 minutes. 然后慢慢加入钛白粉持续搅拌15分钟 Add water, keep under stirring for 15 minutes.加水保持搅拌15分钟 The final paste should be homogeneous; grinds gage 5 micron particle size. 浆料分散均匀，研磨后的粒径要到达5微米以下 HIGH GLOSS WHITE ENAMEL高光白漆 Raw material原料 (%) THYOSIL E1560 (1) 63.58 White grinding 研磨后的白色浆 22.79 THYON T34DPM (1) 润湿剂 1.96 Dowanol DPM (2) 二丙二醇甲醚 1.48 Butyl Glycol 丁基乙二醇 9.12 BYK-022 (3) 消泡剂 0.05 Flash Inhibitor