- 1、本文档共8页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
/BATCH
/COM,ANSYS RELEASE 12.1 U 13:06:05 10/24/2010
/PREP7
! /Batch,list
/prep7
/sho,gasket,grph
shpp,off
ET,1,141 ! Fluid - static mesh
ET,2,182, ! Hyperelastic element
!!!!!!! Fluid Structure Interaction - Multiphysics
!!!!!!! Deformation of a gasket in a flow field.
!
!!!!!!! Element plots are written to the file gasket.grph.
!
! - Water flows in a vertical channel through a constriction
! formed by a rubber gasket.
! - Determine the equilibrium position of the gasket and
! the resulting flow field
!
! |
! |
! |----------| Boundary of morphing fluid
! | ______
! | |______ gasket
! |
! |----------| Boundary of morphing fluid (sf)
! |
!
!! 1. Build the model of the entire domain:
!! Fluid region - static mesh
!!
!! Gasket leaves a hole in the center of the channel
!! Morphing Fluid region is a user defined region around
!! the gasket. The fluid mesh here will deform and be
!! updated as the gasket deforms.
!!
!! Parameterize Dimensions in the flow direction
!!
*SET,yent , 0.0 ! Y coordinate of the entrance to the channel
*SET,dyen , 1.0 ! Undeformed geometry flow entrance length
*SET,ysf1 , yent+dyen ! Y coordinate of entrance to the morphing fluid region
*SET,dsf1 , 0.5 ! Thickness of upstream
*SET,ygas , ysf1+dsf1 ! Y coordinate of the bottom of the gasket
*SET,dg , 0.02 ! Thickness of the gasket
*SET,dg2,dg/2.
*SET,ytg , ygas+dg ! Y coordinate of the initial top of the gasket
*SET,dsf2 , 0.5 ! Thickness of downstream region
*SET,ysf2 , ytg + dsf2! Y of Top of the downstream morphing fluids region
*SET,dyex , 6.0 ! Exit fluid length
*SET,x , 0. ! Location of the centerline
*SET,dgasr ,.20 ! Initial span of ga
文档评论(0)