口腔材料学第六章 树脂基复合材料.pptVIP

纤维增强嵌体冠桥 * Initial Situation. * The pillars were prepared: occlusally 2 mm, other sides 1.5 mm; space should be created for the fibreframe, to obtain sufficient strength and thickness. Curved surface pillars were made. * Technicians made a Stick fibre frame. And from Stick?Net, a separate crown frame for each pillar. These were joined together with Stick?, both occlusally and linqually. * A closer view of the fibre frame. * Note! The fibres in the crown frames should be visible on the attachment surface, to obtain the best possible join between the bridge and teeth. The attachment surf