PATRAN中怎样修补模型间隙.pptVIP

WS8-* PAT301AERO, Workshop 8, October 2004 Copyright? 2004 MSC.Software Corporation WS8-* PAT301AERO, Workshop 8, October 2004 Copyright? 2004 MSC.Software Corporation WORKSHOP 8 SURFACE MESHING FOR NONCONGRUENT SURFACES Workshop 8 – Surface Mesh For Noncongruent Surfaces Objectives Import geometric surfaces from a MSC.Patran neutral file. Observe the many gaps between adjacent surface edges. Mesh the surfaces with tria elements, then connect elements where there are internal free element edges. Create a geometric surface from the tria mesh. Mesh the new surface. Workshop 8 – Surface Mesh For