美国公路与运输协会标准 AASHTO TP63-05 APA车辙试验.pdfVIP

Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA) AASHTO Designation: TP 63-05 American Association of State Highway and Transportation Officials 444 North Capitol Street N.W., Suite 249 Washington, D.C. 20001 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA) AASHTO Designation: TP 63-05 1. SCOPE 1.1. This method describes a procedure for testing the rutting susceptibility of hot-mix asphalt (HMA) using the Asphalt Pavement Analyzer (APA). 1.2. The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3. This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2. REFERENCED DOCUMENTS 2.1. AASHTO Standards: PP 35, Evaluation of Superpave™ Gyratory Compactors (SGCs) T 166, Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens T 168, Sampling Bituminous Paving Mixtures T 209, Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures T 269, Percent Air Voids in Compacted Dense and Open Asphalt Mixtures T 312, Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor 2.2. ASTM