USCAR17 汽车音频连接器产品性能要求规范(Rev 4) 2013.pdfVIP

SAE/USCAR-17 REVISION 4 Issued February 2002 Revised 2013-03 (R) PERFORMANCE SPECIFICATION FOR AUTOMOTIVE RF CONNECTOR SYSTEMS SUMMARY OF CONTENTS 1.0 SCOPE 2 2.0 REFERENCES2 3.0 GENERAL REQUIREMENTS 2 3.1 SAMPLE SIZE 2 3.2 CONNECTOR QUALIFICATION3 3.3 EQUIPMENT 3 4.0 TEST AND ACCEPTANCE REQUIREMENTS 3 4.1 GENERAL 3 4.2 CONNECTOR MECHANICAL TESTS 4 4.3 TERMINAL ELECTRICAL TESTS 10 4.4 CONNECTOR ELECTRICAL TESTS 11 4.5 ENVIRONMENTAL TESTS 16 4.6 TEST SEQUENCE 18 4.7 TEST REPORT 22 APPENDIX A - DEFINITIONS 23 APPENDIX B - WEDGE FOR MATING UNDER SIDELOAD TEST 25 APPENDIX C - REVISIONS 25 __________________________________________________________________________________________________________________________________________ The research data, analysis, conclusion, opinions and other contents of this document are solely the product of the authors. Neither the SAE International (SAE) nor the United States Council for Automotive Research (USCAR) certifies the compliance of any products with the requirements of nor makes any representations as to the accuracy of the contents of this document nor to its applicability for purpose. It is the sole responsibility of the user of this document to determine whether or not it is applicable for their purposes. Copyright © 2013 USCAR