补充拉系统2BinReplenishmenPull培训课件.ppt

2-Bin Replenishment Pull * Full Bin/Card Pull from 1 until empty, send trigger and pull from 2 until empty, send trigger, etc. Use Components Empty Bin/Card 2-Bin Replenishment (“Point-of Use” Stocking) LT OF 1 2-Bin POU stocking is used when re-stocking is not an issue. Stock Room or Vendor Point-Of-Use (POU) Locations or Work-In-Process (WIP) 2 2-Bin Replenishment Pull * 拉动从1开始直到用完为止, 发送触发信号，然后拉动从2开始直到用完为止，发送触发信号, 等等. 使用 部件 2-箱补充(“使用点” 库存) LT OF 1 SS/2 DMD OF) , LT max( 箱数量 + * = 当重新备库存不是一个问题时，使用2-箱 POU 库存 库房或 供应商 2 添满的 箱/卡 空的 箱/卡 使用点位置 (POU) 或工作库存 (WIP) 2-Bin Replenishment Pull * 2-Bin Replenishment Calculations Bin Quantity = Max(LT, OF) + SS/2 If replenishing in standard packs, Bin Quantity is rounded up to the nearest standard pack multiple Example: Calculate the Bin Quantity for the following (standard pack replenishment): Part Number: 40567 Description: Rubber Gloves Demand/Usage: 25 pairs/day Lead Time: 2 days (trigger - stock/supply room - replenishment) Order Frequency: N/A Box Quantity: 50 pairs Bin Quantity = [Max (2 days, N/A) * 25 pairs/day] + .5 * [Max (2 days, N/A) * 25 pairs/day] /2 = 63 pairs But we have to round up to the nearest standard pack, so: Bin Quantity = 100 pairs = 2 boxes 2-Bin Replenishment Pull * 2-箱补充的计算 箱数量 = Max(LT, OF) + SS/2 如果是标准包的补充，箱数量应该是近似于标准包的倍数 举例: 计算下列数据的箱数量 (标准包补充): 零件号码: 40567 描述: 橡胶手套 需求/用量: 25 双/天 交货时间: 2 天 (触发 – 库房 – 补充) 订单频率: 不适用 箱数量: 50 双 箱数量 = [Max (2 天, N/A) * 25 双/天] + .5 * [Max (2 天, N/A) * 25 双/天] /2 = 63 双 但是我们要取一个近似标准箱的数量，所以: 箱数量 = 100 对 = 2 箱 2-Bin Replenishment Pull * Exercise #1:2-Bin Replenishment Calculate the Bin Quantity for the following supply item in a 2-Bin Line-Side Replenishment process directly linked to the supplier: Part Number: 80886 Description: Printer Paper Demand/Usage: 22 reams/day Lead Time: 4 days (trigger - purchasing - supplier - receiving - replenishment) Order Frequency: 5 days Box Quantity: 10 reams Bin Quantity = [Max ( , ) * ] + .5 * [Max