AWWA C214-2000 供水钢管外部胶带包覆系统.pdfVIP

American Water Works Association ANSI/AWWA C214-00 (Revision of ANSI/AWWA C214-95) AWWA STANDARD FOR TAPE COATING SYSTEMS FOR THE EXTERIOR OF STEEL WATER PIPELINES Effective date: Oct. 1, 2000. First edition approved by AWWA Board of Directors Jan. 30, 1983. This edition approved Jan. 23, 2000. Approved by American National Standards Institute July 25, 2000. AMERICAN WATER WORKS ASSOCIATION 6666 West Quincy Avenue, Denver, Colorado 80235 Copyright © 2000 American Water Works Association, All Rights Reserved 省标、国标地方标准系列图集规范 AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA publication of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. AWWA standards are intended to represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first pag