学士学位论文 W18Cr4V钢的淬火工艺及组织性能分析.docVIP

XXXXXXXX大学学士学位论文 PAGE \* Arabic 2 XXXXXXX大学 学士学位论文 论文题目: W18Cr4V钢的淬火工艺及组织性能分析 院(部)名 称: 学 生 姓 名: 专 业: 学 号: 指导教师姓名: 论文提交时间: 论文答辩时间: 学位授予时间: XXXXXXXX大学教务处制 XXXXXXXX大学学士学位论文 = 1 \* ROMAN I PAGE I 摘 要 W18Cr4V钢是制作冷作模具和刃具常用的材料，铸态的W18Cr4V钢组织中一般会含有大量的分布不均匀的共晶碳化物，锻压或轧制处理可以使共晶碳化物碎化，但不会对碳化物不均匀分布的状况产生太大改变。为了改善碳化物分布不均匀的状况，生产生活中还要对W18Cr4V钢进行退火、淬火以及回火等必要的热处理工艺，这将会在很大程度上提高W18Cr4V钢产品的使用寿命。论文对W18Cr4V钢的成分特点、组织性能进行了详细的分析，阐述了W18Cr4V钢的退火工艺，淬火工艺和回火工艺流程。并设计了W18Cr4V钢的热处理实验，对W18Cr4V钢退火之后、淬火之后、一次回火之后、两次回火之后和三次回火之后的金相组织和力学性能进行了研究分析，这对实际生产具有一定的意义。 关键字：W18Cr4V，淬火工艺，组织，性能 XXXXXXXX大学学士学位论文 = 3 \* ROMAN III = 2 \* ROMAN II ABSTRACT High-speed steel W18Cr4V is the common material for making cold working dies and tools. The as-cast steel of W18Cr4V generally contain a lot of eutectic carbides which is uneven distribution, forging or rolling processing can make the eutectic carbides fragmentation, but the condition of the uneven distribution of carbides cannot be better. To improve the service lives of tools and dies, it is necessary to eliminate the inhomogeneous distribution o f carbides in W18Cr4V by annealing, quenching and tempering. The papers make a detailed analysis on the properties and composition characteristics of W18Cr4V, and describe the process flow of annealing, quenching and tempering of W18Cr4V.A heat treatment experiments of W18Cr4V steel is designed. The papers research and analysis the microstructure and mechanical properties of W18Cr4V on five stages: after the annealing, after the quenching, after the first tempering, after the second tempering and after the third tempering. The work has an instructive significance to the production. Key word：W18Cr4V， Quenching process, Organization, Performance. XXXXXXXX大学学士学位论文 = 4 \* ROMAN IV 目录 TOC \o 1-3 \h \z \u 前言 1 第1章 W18Cr4V钢的基本信息 2 1.1 W