基于UG带式输送机传动装置设计-毕业设计(论文).docVIP

红河学院本科毕业论文 (设计) 基于UG带式输送机传动装置设计 ) 摘要 本毕业设计的论文主要阐述对带式输送机进行总体设计及采用UG软件对主要零件如轴、齿轮、箱体等进行结构设计，绘制零件工作图，对齿轮减速器进行结构设计，绘制减速器工作图；二级圆柱齿轮减速器三维实体建模是利用UG软件的建模功能绘制减速器部件实体三维立体图，让制造者能从感性直观的看到的部件成品模型。再利用UG软件的制图功能绘制主要部件平面工程图，让制作者能客观的观察到模型的尺寸和各方面信息，指导模型制造。最后利用UG软件的装配功能将各部件组装成减速器的成品实物三维模型图，绘制总的装配工程图，完成本次设计。在论文中，首先，带式输送机进行了总体方案设计，接着，介绍了UG软件并阐述了带式输送机和二级圆柱齿轮减速器并对其主要部件零件三维建模绘制的过程然后减速器零件工程图的绘制的过程讲述，最后介绍减速器的装配图的组装过程。 关键词：带式输送机；UG；二级圆柱齿轮减速器；建模；工程图；装配 Abstract The graduation project thesis elaborates on the belt conveyor design and the use of UG software on the main parts such as shafts, gears, boxes and other structural design, drawing parts working drawing, the structural design of the gear reducer, reducer drawing work plan. Two cylindrical gear reducer is the use of three-dimensional solid modeling software modeling UG draw three-dimensional map entities reducer parts, so that manufacturers can see the emotional and intuitive parts of finished model. UG software re-use the main components of drawing functions draw drawing plane, so that producers can objectively observe the size and model of information, guidance model manufacturing. Finally, the assembly functions of UG software components will be assembled into the finished product in-kind three-dimensional model reducer maps, general assembly drawings, and the completion of this design. In the paper, first, the overall design of belt conveyor then introduced and described UG software and secondary belt conveyor gear reducer and its main component parts and then three-dimensional modeling of the process of drawing Engineering Drawing parts reducer process described. Finally, the assembly graph reducer assembly. Keywords: Belt Conveyor;UG;2 Cylindrical Gear Reducer;Modeling;Engineering Graphics; Assembly PAGE 22 PAGE I 目录 TOC \o 1-3 \h \z \u 前言 1 第一章 带式输送机总体方案设计 3 1. 设计任务书 3 1.1 已知条件 3 1.2 设计任务： 3 1.3 带式运输机设计方案的选择 3 2. 电动机选择 4 2.1 电动机容量的选择 4 2.2 电动机转速的选择 4 2.3 电动机型号的确定 4 3．传动装置的运动和动力参数 5 3.1 传动装置