雅马哈贴片机错误代码.doc

　　 雅马哈贴片机错误代码 雅马哈贴片机全系列(yv,yg,ys)错误代码,内部资料,独家秘笈。。。 Ea00000Ea00001Ea00002 (meaning)Recognition has been made successfully.(cause)None (remedy)Not needed (meaning)The size of one side of the detected component is 0.CORRECTION DATA ERROR (cause)The component is standing on end.Only 1 Lead detected. (remedy)Adjust the reader head to improve pickup. (meaning)Convergence of multi-stage recognition was not possible.CORRECTION DATA ERROR (cause)The axis positioning capability is inadequate.Correction data is not loaded. Or it diversifies. (remedy)Check to see if the component is slipping on t henozzle oris otherwise insecurely attached. (meaning)Recognition of the component was not PONENT DETECTION ERROR to find first lead. Failed to find the first Lead Edge(cause)The component has not been picked up, or the component too dark to be seen by the camera. (remedy)Adjust so that the comp/b33f83dc2139b733658dfddb7.htmlonent can be picked up. UseMount data765 adjustment to change the recognition ponent data150 set position20 (meaning)One of the components leads could not be PONENT DETECTION ERROR (cause)The recognition parameter is for a different component, orFailed to find second lead. different component is being recognized. (remedy)Use supplementary adjustment to re-adjust.Mount data765 data150Feeder set position20 (meaning)The number of detected leads is different.LEAD NUMBER ERROR number of detected leads is different than specified.(remedy)The data is for a different component or the offset value the detected line is inappropriate. (cause)Use supplementary adjustment to correct the component,Mount data765 check the ponent data150 set/b33f83dc2139b733658dfddb7.html position20 (meaning)The number of leads detected is different from the set-LEAD EDGES NUMBER ERROR number of detected lead edges is different than speci-ting. (remedy)Recognition is not stable.fied. (cause)Change the recognition position or the flash intensity.Mount data765 data150Feeder set position20 (meaning)T