耳机绕线器设计说明书.docxVIP

摘 要 绕线器又称卷管器，卷线器，卷盘，卷鼓。在人们日常生活工作中广泛应用。本文主要研究耳机绕线器注塑模具的结构，例如其凸模位置、型腔数，基准面、分型面、型腔数量、排列方式、浇注系统的确准，满足浇注口的位置、尺寸，流道的位置、尺寸等各方面模具的设计要求。确定塑料注塑工艺的参数。并应用教材《塑料成型工艺以及注塑模具设计》中前四章的专业知识进行设计计算，在ProE中完成三维建模与模架的装配。设计内容主要包括塑件成型工艺性分析；拟定模具的结构形式，型腔设计以及确定分型面的位置；浇注系统的设计，浇口；成型零件的结构设计及计算；模架的确定；排气槽的设计；脱模推出机构的设计；冷却系统的设计；最后导出装配图以及二维零件图，完成本设计。 关键词：注塑模具设计 ABS 耳机绕线器 注塑成型工艺 三维模型 工程图  ABSTRACT The winder is also called a hose reel, a reel, a reel, and a drum. Widely used in peoples daily work. This paper mainly studies the structure of the earphone winder injection mold, such as the position of the punch, the number of cavities, the reference surface, the parting surface, the number of cavities, the arrangement, the accuracy of the gating system, and the position, size and flow of the sprue. The design requirements of the mold, such as the position and size of the road. Determine the parameters of the plastic injection molding process. And use the professional knowledge of the first four chapters of the textbook Plastic molding process and injection mold design to carry out design calculation, complete the three-dimensional modeling and mold frame assembly in ProE. The design content mainly includes the process analysis of plastic parts forming; the structure form of the mold, the cavity design and the location of the parting surface; the design of the gating system, the gate; the structural design and calculation of the molded part; the determination of the formwork; The design of the air trough; the design of the demolding mechanism; the design of the cooling system; the final export of the assembly drawing and the two-dimensional part drawing to complete the design. Key words: Injection mold design ABS Injection mold process 3D model  目 录 TOC \o 1-2 \h \z \u 第一章 绪论 1 1.1模具研究的意义 1 1.2国内外模具发展现况 1 1.3课题的研究目标及内容 2 第二章 塑件成型工艺性分析 3 2.1塑件的分析 3 2.2ABS的性能分析 3 2.3ABS的注射成型过程及工艺参数 4 第三章 拟定模具的结构形式 5 3.1分型面位置的确定 5 3.2型腔数量和排列方式的确定 6 3.3注射机型号的确定 7 第四章 浇注系统的设计 8 4.1流道的设计 9 4