《neuros风机技术宣传资料》.pptVIP

Neuros鼓风机的操作控制 自动控制系统确保了高效和经济性. 通过变频控制电机转速，达到自动调节控制风量和风压的目的。 (与传统风机所不同的是，我们的风机没有导叶片，所以无导叶片损失也没有叶轮入口“预旋”撞击损失) 29 关于夏季运行及出风压力 夏季, 由于气温升高造成空气密度下降, 鼓风机的出风压力较之冬季会有所下降。 传统离心鼓风机由于采用的是定速设计，其喘振安全裕度将完全丧失，或其出风压力将低于设计规格。 所以，用户若选用传统离心风机，为了补偿夏季的性能下降，将不得不选用较大的机型。 ◎ 而Neuros鼓风机的控制模式具备了转速自动补偿模式，所以在夏季依然可以保持所需的出风压力。 30 振动环境测试 Axial Lateral Lateral Direction Excitation Test Scene To use turbo blower for cooling the generator of high-speed train of US ALPS Co., vibration test was performed by applying the vibration condition of 0.6 g (0~100 Hz) which is the vibration level when loaded on the high-speed train * Seismic design top grade in JAPAN : 0.6 g (0~50 Hz) Blower performance of pressure 0.6 kgf/?, air flow 50 ?/min (8.5 PSI, 1765.8 CFM) was maintained constantly before/during/after vibration test. Confirm normal operation by forced vibration or acceleration Axial Direction Excitation Test Scene 31 Neuros鼓风机可靠性测试 Supplying high temperature air by electrical heater To verify normal system operation and safety at max. 45 ℃ (113 ℉) inlet air temperature Tested at Rated / Max. load / Max. air flow conditions Blower performance of pressure 0.6 kgf/?, air flow 50 ?/min (8.5 PSI, 1765.8 CFM) was maintained constantly before/after high temperature environment test ◎Inverter separation type can be usually recommended over 40℃ suction air environment for its long life span not affected by it. Distance between Blower Unit and Inverter can be max. 200 m. 高温环境测试 结构安全性测试 Verified structural safety of impeller at 1.2 times maximum operation speed Test item that should be performed in case of high-speed impeller (the whole test) Check lists : Damage, deformation (recovery) Spin Tester in NEUROS, Co. (Max. 200,000 rpm) 32 ＮＥＵＲＯＳ涡轮鼓风机 产品介绍 1 对鼓风机的性能要求以及实现的方法 所要求的性能参数： 风量以及风压 方法： 　　　改变容积　 ???　容积式鼓风机 　　　利用离心力