ME2206-E5.0微盟原厂规格书.pdf

3W High Power White LED ME2206 Ver05 Ver04 3W High Power White LED ME2206 General Description： Features： The ME2206 is a set-up DC-DC converter  LED Power Efficiency: up to 90% that delivers a regulated output current. The  Current Accuracy: ±10% device switches at a 1MHz constant  Low Start-Up Voltage: 0.9V(ILED ＝270mA) frequency,allowing for the use of small value  Low Hold Voltage:0.75V(ILED ＝200mA) external inductor and ceramic capacitors.  1MHz Switching Frequency The ME2206 is targeted to be used for  Uses small, Low Profile External driving loads up to 1A from a two-cell alkaline Components battery. The LED current can be programmed  Low RDS(ON) : 100mΩ (TYP.) by the external current sense resistor, Rs,  Open LED Protection connected between the feedback pin (FB) and  Over Temperature Protection 5 ground. A low 95mV feedback voltage reduces  Packages: SOT-23-6,SOT89-5 0 the power loss in the Rs for better efficiency.  Pb-Free Package 3 During the shutdown mode, the feedback 3 1 resistor Rs and the load are completely 5 disconnected and the current consumption is 3 reduced to less than 1uA. 2 Applications ： 8 Typical Application ： 3  White LED Torch (Flashlight) 1  White LED Camera Flash :  DSC(Digital Still Camera)Flash L L  Cellular