MIL-A-8625F(1) 国外国际标准.pdf

NOT MEASUREMENT SENSITIVE MIL-A-8625F AMENDMENT 1 15 September 2003 MILITARY SPECIFICATION ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS This amendment forms a part of MIL-A-8625F, dated 10 September 1993, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE 2 2.1.1, under SPECIFICATIONS, MILITARY: Delete “MIL-C-81706 – Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys.” PAGE 3 , line 7: Delete “IA…” and substitute “IB.” PAGE 4 : Change paragraph number to “.” In line 4, delete “IA” and substitute “IB.” PAGE 5 Add: “ Photosensitized (identification) nameplates. When type II anodic coatings are specified for use in photosensitized nameplates, oxalic acid anodizing may be used in lieu of sulfuric acid anodizing. If oxalic acid anodizing is used, the resultant coating shall meet the requirements of this specification for type II anodic coatings. If copy and background color are added to photosensitive nameplates, silver compounds or dyes shall be used. Unprocessed photosensitive aluminum shall be classified as class 1. Nameplates made from photosensitive aluminum shall be classified as class 2.” AMSC N/A 1 of 3 AREA MFFP DISTRIBUTION STATEMENT A. Appr