标准规范文件：L和Y 检测标准d3039.pdfVIP

Designation: D 3039/D 3039M – 001 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials1 This standard is issued under the fixed designation D 3039/D 3039M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1 NOTE—Eq 5 was revised editorially in December 2002. 1. Scope Properties and Equilibrium Conditioning of Polymer Ma- 1.1 This test method determines the in-plane tensile prop- trix Composite Materials4 erties of polymer matrix composite materials reinforced by E 4 Practices for Force Verification of Testing Machines5 high-modulus fibers. The composite material forms are limited E 6 Terminology Relating to Methods of Mechanical Test- to continuous fiber or discontinuous fiber-reinforced compos- ing5 ites in which the laminate is balanced and symmetric with E 83 Practice for Verification and Classification of Exten- someters5 respect to the test direction. 1.2 The values stated in either SI units or inch-pound units E 111 Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus5 are to be regarded separately as standard