51单片机数码管显示时钟程序.pdfVIP

. #includereg52.h //#include#includeintrins.h #define uchar unsigned char #define uint unsigned int sbit dula=P2^6; sbit wela=P2^7; sbit key1=P3^4; sbit key2=P3^5; sbit key3=P3^6; sbit beep=P2^3; unsigned code table[]={ 0x3f , 0x06 , 0x5b , 0x4f , 0x66 , 0x6d , 0x7d , 0x07 , 0x7f , 0x6f , 0x77 , 0x7c, 0x39 , 0x5e , 0x79 , 0x71 }; uchar num1,num2,s,s1,m,m1,f,f1,num,numf,nums,dingshi; uchar ns,ns1,nf,nf1,numns,numnf; void delay(uint z); void keyscan (); void keyscan1 (); void alram(); void display(uchar m,uchar m1,uchar f,ucharf1,uchars,uchars1); void display0(uchar nf,uchar nf1,uchar ns,uchar ns1); void main() { TMOD=0x01;// 设定定时器 0 工作方式 1 TH0=(65536-46080)/256 ; TL0=(65536-46080)%256 ; EA=1;// 开总中断 ET0=1;// 开定时器 0 中断 TR0=1;// 启动定时器 0 中断 numns=12; numnf=0; while(1) { if(dingshi==0) { keyscan (); display(m,m1,f,f1,s,s1); alram(); } . . else { keyscan1 (); display0(nf,nf1,ns,ns1); } } } void keyscan () { if(key1==0) { delay(10); if(key1==0) nums++; if (nums==24) nums=0; while(!key1); display(m,m1,f,f1,s,s1); } if(key2==0) { delay(10); if(key2==0) numf++; if (numf==60) numf=0; while(!key2); display(m,m1,f,f1,s,s1); } if(key3==0) { delay(10); if(key3==0) { dingshi=~dingshi; while(!key3) display(m,m1,f,f1,s,s1); } } . . /* i