Datasheet-HDMI Type C 测试治具简介.pdfVIP

HDMI Type C test fix ture datasheet HDMI announced new 1.3 version specification with LiTek s HDMI Type C test fixture includes 4 RF signal a new physical interface connector named HDMI Type C pairs. One is TMDS clock, other 3 pairs are D0, D1 and D2 or Mini HDMI. HDMI Type A and Type C are Both with TMDS pairs. 19 pins but the Type C is smaller and suitable for portable device. The type C connector carries the same These 4 pairs are well designed with 100 Ohms signals as the Type A but is more compact and intended differential signals. As the figure below, There are 8 SMA for mobile applications. connectors used to connect to Equipment. Because HDMI is a one-direction transmission interface, the type C connector will be placed in the source end and the type A or another type C connector will be placed in the display (sink) end. In that, we will have many kinds of HDMI assembly in the future. Without considering DVI and HDMI Type B connectors, HDMI will have Type A to Type A, Type A to Type C and Type C to Type C. But if we include DVI and HDMI Type B connectors, there will be more types of HDMI cable assembly. The HDMI Type C connector is structured in one layer, therefore the pin assignment is different with Type A connector. In order to reduce the dimension of Type C, the pitch between the signals had also reduced to 0.4 mm. This will result in difficult for assembly company to manufacture their cable assembly. Figure 2:HDMI Type C test fixture Features: Fixture impedanc