凯视达使用说明书 KS800.doc

KStone-800 AV Processor Two splicing outputs with res Two splicing outputs with resolution up to 2560×1536@60Hz Support synchronous transition of audio and video Two-channel output, able to complete PIP and POP display Support 1080P full-screen monitoring output Fade-in and fade-out transition between any two signals 2pcs LED sending cards built-in ability Navigational settings, easy to be used without training Professional Configurations   Colorful LCD display panel2-Channel DVI HD OUTStereo AU OUTRS232 COM PortProfessional AV PortsStandard KS800 has 7-channel video input:DVI×1，HDMI×1，VGA×2，CVBS×3;A SDI input is optionalIn particular, KS800 is equipped with 4-channel stereo input (The video signals can be specified for synchronous switching) Colorful LCD display panel 2-Channel DVI HD OUT Stereo AU OUT RS232 COM Port Professional AV Ports Standard KS800 has 7-channel video input: DVI×1，HDMI×1，VGA×2，CVBS×3; A SDI input is optional In particular, KS800 is equipped with 4-channel stereo input (The video signals can be specified for synchronous switching) Crystal illuminant button Crystal illuminant button A Adjusting knob FOD FOD transmitter card slot 4-Channel 4-Channel Stereo audio input 7 + 1 7 + 1-Channel HD-SD video in  Three Output Modes Splicing Mode Splicing Modes The two outputs of KS800 output different parts respectively to form a complete picture and realize seamless splicing on the LED diplay, able to support the maximum 2560×1536 resolution. Copy Copy Mode The two output ports of KS800 output uniform picture. It is easy to drive two identical screens. When driving a single screen, it can also be relatively easy to connect the sending cards. 监视模式KS800C的两个输出口保持同一信号输出，主通道作为编程输出，驱动LED大屏幕，另一个通道保持图像原貌，驱动本地监视器，同时无显示黑边。 监视模式 KS800C的两个输出口保持同一信号输出，主通道作为编程输出，驱动LED大屏幕，另一个通道保持图像原貌，驱动本地监视器，同时无显示黑边。 Monitoring Monitoring Mode The two output ports of KS800 output uniform signal.One acts as a programming output to drive the LED display while the other one k