完整版ug的ISV机床仿真与后处理.pptVIP

* CSE Simulation Engine Encapsulation of RealNC In NX5, OOTB support for Fanuc – NX5 Siemens 840D, Heidenhain – NX6 * “Out of the Box” Simulation ONT Tool View Double Click Replace Machine Milling Turning * “Out of the Box” Simulation Sample MACH\samples\nc_simulation_samples\mill\5axis sim_8_machine_5x_mm.prt 5 Axis Dual Table * CSE CSE comprises of three components Controller specific language parser Delivered with NX5 installation Controller Configuration file (CCF) Encrypted XML, CCF for Fanuc has shipped as OOTB configuration with NX5 installation Machine configuration file (MCF) * OOTB Installed Machine Configurations – NX5 Mills 1 XYZ (XY-TB/Z-HD/Vert) 2 XYZ (XYZ-TB/Hor) 3 XYZ (XZ-TB/Y-HD/Hor) 4 XYZ (Z-TB/XY-HD/Hor) 5 XYZA (XYA-TB/Z-HD/Vert) 6 XYZA (XZA-TB/Y-HD/Hor) 7 XYZCB (XYC-TB/ZB-HD/Vert) 8 XYZAB (XZAB-TB/Y-HD/Hor) 9 XYZCA (XYZAB-HD/Gantry) 10 XYZB (XZB-TB/Y-HD/Hor) 11 XYZBC (XBC-TB/ZY-HD/Vert) 12 XYZBC (BC-TB/XYZ-HD/Vert/Nutate)  Lathes 1 XZ with turret 2 XZ In NX5, OOTB machine configurations are for Fanuc only. Siemens and Heidenhain would be available in NX6 timeframe. Non-orthographic 45degree * Machine Tool Driver (MTD) Generates NC-Program and emulates the NC controller. Post Processor Virtual NC Controller Key role in machine tool simulation. Motion control - accurate path based on machine configuration. Handles specific machine tool features such as macros, cycles, subroutine call. Textual, graphical and audio feedback triggered by events. Fully customizable as TCL program. NC code CL File G01 X3.4 G03 Y3.1 I3.3 Virtual NC Controller Process Data Events Machine Tool Driver SV Engine SV Events NC code SV Commands Process Data Events Machine Tool Driver SV Events Post Event Handler NC Controller Plug-IN * ISV的构成 Machine tool builder ——机床构造器 Setup configurator——环境配置器 Machine tool simulation——机床加工模拟 Machine tool driver——机床驱动器 Virtual NC Controller——NC控制器 * Machine Tool Builder——机床构造器 构造机床及设备的应用模块. 通过装配来构建几何模型. 创建运动模型. 定义安装模型. 模