PLC控制的变频电梯系统的设计.docxVIP

PAGE PAGE 30 毕业实践任务书 课题名称 PLC控制的变频电梯系统的设计 指导教师 职 称 专业名称 班 级 学 生 姓 名 学 号 课题需要完成的任务： 电梯控制的基本思路是当电梯上升下降时，在上升下降的同时，要顾及到等待时间、加速时间，人性化的设计。在上升时，有人按了上升按钮，则要在经过的时候停止，开门；下降时亦相同。系统主要由变频器，PLC，曳引电机，按钮四部分组成。按钮连接PLC的I/O口，按下按钮的时候，PLC将信号转换为模拟信号，传给变频器，变频器改变曳引电机的转向。其中曳引电机的速度改变。主要完成任务如下： （1） 三菱公司的FX2N-80MR-D模拟量扩展模块的程序设计 （2） 变频器控制的程序设计 课题计划： x.x~x.x 熟悉课题，准备资料； x.x~x.x 设计硬件； x.x~x.x 编写毕业设计论文； x.x~x.x 准备毕业答辩。 计划答辩时间：xxxx年x月x日~x日 xxxxxx（分院、系部） xxxx年xx 月xx日 外文翻译 INDUSTRIAL AND COLLABORATIVE CONTROL SYSTEMS A COMPLEMENTARY SYMBIOSIS – Looking at today’s control system one can find a wide variety of implementations. From pure industrial to collaborative control system (CCS) tool kits to home grown systems and any variation in-between. Decisions on the type of implementation should be driven by technical arguments Reality shows that financial and sociological reasons form the complete picture. Any decision has it’s advantages and it’s drawbacks. Reliability, good documentation and support are arguments for industrial controls. Financial arguments drive decisions towards collaborative tools. Keeping the hands on the source code and being able to solve problems on your own and faster than industry are the argument for home grown solutions or open source solutions. The experience of many years of operations shows that which solution is the primary one does not matter, there are always areas where at least part of the other implementations exist. As a result heterogeneous systems have to be maintained. The support for different protocols is essential. This paper describes our experience with industrial control systems, PLC controlled turn key systems, the CCS tool kit EPICS and the operability between all of them. FUNCTIONALITY The ever lasting question why control systems for accelerators and other highly specialize