MIL-HDBK-1013-1993 标准规范下载.pdf

HIL-SDBK-1013 /1A Section 1: INTRODUCTION 1.1 Purpose and Score. Thie handbook iB to be used during tha engineering deeign of Department of Dafense (DoD) facilities to aaeure appropriate physical eecurity is included. The guidelines are based upon the beat currently available research and test data, and will be revised or expanded as additional research reeults become available. The contentn include procedures for planning and designing an integrated physical security eystem for new facilities as well an the retrofit of existing facilities. The focus is on construction choices for protection against forced entry, and balliet ic and standoff weapona. Design procedures are also summarized for vehicle bomb blaet protection, referencing appropriate eourcee for details. 1.2 Cancellation. ThIe handbook supersedes Military Eandbook (tlIL-SDBK) 1013/1, Deaim Guidelines for Phveical Securitv of Fixed Land-Sased Facilities, dated 9 October 1987. 1.3 Uain.zthe Handbook. Thie handbook is divided into eight major sections and four appendices. Sections 2 and 3 contain procedures to follow during the planning and deeign phases of a project to assure adequate security. Sections 4 through 8 contain supporting detailed deeign data and instructions. The appendices contain physical eecurity system design worksheets. The content of each major section is summarized as follws: Section 2 - Pre-DesiRn Phaae: Specific requirements and criteria for the security eystem are established during the pre.design phase. The section begine with a brief overview of DoD directives and instructions defining physical eecurity related planning policies and requirements. Thin ie followed by a procedure to establieh: