ASME RTP-1-2019 国外国际规范.pdf

ASME RTP-1–2019 (Revision of ASME RTP-1–2017) Reinforced Thermoset Plastic Corrosion-Resistant Equipment A N A M E R I C A N N A T I O N A L S T A N D A R D ASME RTP-1–2019 (Revision of ASME RTP-1–2017) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD Date of Issuance: December 31, 2019 The next edition of this Standard is scheduled for publication in 2021. This Standard will become effective 6 months after the Date of Issuance. ASME issues written replies to inquiries concerning interpretations of technical aspects ofthis Standard. Periodically certain actions of the ASME RTP Committee may be published as Cases.Cases and interpretations are published on the ASME website under the Committee Pages at / as they are issued. Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly publisheditems, orto correcttypographical orgrammatical errors incodes and standards. Such errata shall be used on the date posted. The Committee Pagescan befound at /.There is an option availableto automatically receivean e-mail notification when errata are posted to a particular code or standard.This option can befound on the appropriate Committee Page after selecting “Errata” in the “Publication Information” section. ASME is the registered trademark of The American Society of Mechanical Engineers. This code orstandardwas developed under procedures accreditedas meetingthe criteriafor American NationalStandards.The Standards Committeethat approvedthe codeorstandardwas balancedto assurethat individualsfromcompetentandconcerned interests havehadan opportunity to participate.The proposed code or standa