- 1、本文档共29页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
标准文档
Manual of the Krones Aseptic line CC Xiamen
Content
内容
Sterilization UHT / Bloc 3
UHT杀菌系统 / 洁净空间
Production preparation 6
生产准备
Production 14
生产
Type change over 16
产品转换
End of production 20
生产结束
Empty the disinfection bath 23
清空盖槽
CIP caustic and acid 26
CIP 碱酸洗
N2 injector 29
滴氮系统
文案大全
标准文档
Manual of the Krones Aseptic line
Krones 无菌生产线手册
Sterilization UHT / Bloc
UHT杀菌系统 / 洁净空间
MMA -> Programs 程序 -> Program selection, general, U01
文案大全
标准文档
Sterilization 杀菌 -> Sterilization 杀菌 -> Start 开始
文案大全
标准文档
Activating the step sequences, it is possible to follow the program
启动程序步骤,才有可能进行程序操作
MMA -> Step sequences -> Step sequence general U01
文案大全
标准文档
During sterilization , temperatures and flow is controlled by the PCS.
These temperatures have to reach at least 121 °C minimum for 20 min.
在杀菌( SIP )期间,温度以及流体的流量由 PCS控制。杀菌温度必须达到至少 121 °
C并且保持 20 分钟。
At the end of the sterilization process it is necessary to reset the step
sequence with the blue button on the PCS (end phase).
在杀菌过程完成的时候,有必要使用蓝色按钮重置步骤,
文案大全
标准文档
Production preparation
生产准备
The preparation of production includes the following:
生产准备包括如下步骤:
- Take out the rinser CIP caps (manually)
取下冲瓶机 CIP 洗杯(人工)
- Take out the filler CIP caps
取下灌注机 CIP 洗杯
- Preparation of PAA
PAA 准备
- Disinfection of the filler Bloc
无菌空间消毒
- Fill up the filler with sterile product from Tetra-Pak
用 Tetra-Pak 系统提供的无菌产品充满注入机(环缸)
MMA -> Programs -> Program selection gene
文档评论(0)