49CFR571-2008 国外国际规范.pdf

§ 570.63 49 CFR Ch. V (10–1–08 Edition) § 570.63 Wheel assemblies. 571.117 Standard No. 117; Retreaded pneu- matic tires. (a) Wheel integrity. A tire rim, wheel 571.118 Standard No. 118; Power-operated disc or spider shall have no visible window, partition, and roof panel sys- cracks, elongated bolt holes, or indica- tems. tions of in-service repair by welding. 571.119 Standard No. 119; New pneumatic (1) Inspection procedure. Examine vis- tires for motor vehicles with a GVWR of ually for the conditions indicated. more than 4,536 kilograms (10,000 pounds) and motorcycles. (b) Cast wheels. Cast wheels shall not 571.120 Tire selection and rims and motor be cracked or show evidence of exces- home/recreation vehicle trailer load car- sive wear in the clamp area. rying capacity information for motor ve- (1) Inspection procedure. Examine vis- hicles with a GVWR of more than 4,536 ually for the conditions indicated. kilograms (10,000 pounds). (c) Mounting. All wheel nuts shall be 571.121 Standard No. 121; Air brake systems. in place and tight. 571.122 Standard No. 122; Motorcycle brake (1) Inspection procedure. Check wheel systems. 571.123 Standard No. 123; Motorcycle con- retention for the conditions indicated. trols and displays. 571.124 Standard No. 124; Accelerator con- PART 571—FEDERAL MOTOR trol systems. VEHICLE SAFETY STANDARDS 571.125 Standard No. 125; Warning devices. 571.126 Standard No. 126; Electronic sta- Subpart A—General bility control systems. 571.127–571.128 [Reserved] Sec. 571.129 Standard No. 129; New non-pneu- 571.1 Scope. matic tires for passenger cars. 571.3 Definitions. 571.131 Standard No. 131; School bus pedes- 571.4 Explanation of usage. trian safety devices. 571.5 Matter incorporated by reference. 571.135 Standard No. 135; Light vehicle 571.7 Applicability. brake systems. 571.8 Effective date. 571.138 Standard No. 138; Tire pressure mon- 571.9 Separability. itoring systems. 571.139 Standard No. 139; New pneumatic ra- Subpart B—Federal Motor Vehic