ASME A112.19.2A-2009 国外国际规范.pdf

Update No. 1 ASME A112.19.2-2008/CSA B45.1-08 August 2009 Note: General Instructions for CSA Standards are now called Updates. Please contact CSA Information Products Sales or visit www.ShopCSA.ca for information about the CSA Standards Update Service. Title: Ceramic plumbing fixtures — originally published August 2008 The following revisions have been formally approved and are marked by the symbol delta (Δ) in the margin on the attached replacement pages: Revised Clauses 3, 7.4.5, and 9.3.2, and Table 5 New None Deleted None ASME A112.19.2-2008/CSA B45.1-08 originally consisted of 69 pages (xvi preliminary and 53 text), each dated August 2008. It now consists of the following pages: August 2008 iii–xvi, 1–6, 9–20, 23–28, 31, 32, and 35–53 August 2009 7, 8, 21, 22, 29, 30, 33, and 34 • Update your copy by inserting these revised pages. • Keep the pages you remove for reference. © American Society of Mechanical Engineers © Canadian Standards Association Ceramic plumbing fixtures Low-consumption water closet — a water closet with an average water consumption of 6.0 Lpf (1.6 gpf) or less when tested in accordance with this Standard. Δ Water-saving water closet — Deleted. Water surface — the surface of the still water in the well of a water closet or urinal when the trap is filled to the weir. Weir — the lowest internal surface of the highest part of a trap (see Figure 13). Well — a pocket that is open at the top and formed inside a water closet bowl or urinal at the entrance to the trap. 3.2 Abbreviations The following abbreviations apply in this Standard: CL — critical level gpf — gallons per flush Lpf — litres per flush 4 General requirements 4.1 Dimensions and tolerances 4.1.1 Thickness Th