AMS2408J-2008 国外国际规范.pdf

AEROSPACE AMS2408J MATERIAL SPECIFICATION Issued 1946-11 Revised 2008-11 Superseding AMS2408H Plating, Tin RATIONALE AMS2408J results from a Five Year Review and update of this specification. NOTICE ORDERING INFORMATION: The following information shall be provided to the plating processor by the purchaser. 1) Purchase order shall specify not less than the following: AMS2408J Plating thickness (3.4.1) Basis metal to be plated Tensile strength or hardness of the basis metal Pre-plate stress relief to be performed by plating processor (time and temperature) if different from 3.1.1 Special features, geometry or processing present on parts that requires special attention by the plating processor Hydrogen embrittlement relief to be performed by plating processor (parameters or reference document) if different from 3.3.1 Minimum thickness on internal surfaces, if required () Optional: Reflow of plating () Option