SSPCINTERIMGUIDETOSSPC-VIS4(1)-NACENO[1].7 国外国际规范.pdf

SSPC-Guide to VIS 4(I) July 1, 1998 Editorial Changes September 1, 2000 SSPC: The Society for Protective Coatings INTERIM GUIDE TO SSPC-VIS 4(I)/NACE NO. 7 Visual Reference Photographs for Steel Cleaned by Water Jetting Disclaimer Foreword SSPC and NACE International i ue this Guide to reference photographs in conformance with the best cur- This guide describes the use of the visual reference rent technology regarding the specific subject. This Guide photographs depicting the appearance of mill scale-free, represents a consensus of those individual members who unpainted, rusted carbon steel prior to and after cleaning by have reviewed this document, its scope, and provisions. water jetting (WJ). The steel surfaces had previously been This Guide is intended to aid the manufacturer, the con- blast cleaned to remove the mill scale and were then sumer, and the general public. Its acceptance does not in allowed to rust. Although prepared from unpainted steel, any respect preclude anyone, whether he has adopted the the photographs are also suitable for depicting the appear- Guide or not, from manufacturing, marketing, purchasing, ance of painted steel after water jetting. or using products, proce es, or procedures not in con- NOTE: SSPC and NACE International Visual Refer- formance with this Guide. Nothing contained in this Guide ence Photographs are intended to supplement