MIL-PRF-62419A 国外国际规范.pdf

W6U19A SUPERSEDING Mlf/C-r52A19 29 May 1989 PERFORMANCE SPECIFICATION COMPOSITE MATERIALS FOR MLMTARY VEHICLES This specification is approved for use by all Deparrrnenrs and Agencies of the Department of Defense. 1. SCOPE 1.1 a. This specification covers commercial plastic-s for use as a repIacemerrt of wood components, such as troop slats, seat racks, stakm, and planks, in military vehicles. 2. APPLICABLE DOCUMENTS 2.1 fkrtcml. The documents listed in Uds section are specified in sections 3 and 4 of this specification. lltk section does not include documents cited in other sections of this specification or recommended for additional information o! as examples. While every effort has been made to ensure the completeness of this Ii.% document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whetfrer or not they are listed. ‘Berreficisf comments (recommendations, additioms, deletions) and any pertirterrt data which may be of use in improving this document should be addressed to U.S. Army Tank-automotive and Armaments Command, A’fTN: AMSTA-TR-E5LUE, Warren, Ml 48397-5000 by using the Starrdsnfisstion Document Improvement Proposal (DD Form 1425), appearing at the end of this