MIMO天线设计_图文.doc

Wideband Low-Loss Magnetoelectric Dipole Antenna for5G Wireless Network With Gain Enhancement Using Meta Lens and Gap Waveguide Technology Feeding Abdolmehdi Dadgarpour,Member,IEEE,Milad Shari?Sorkherizi,and Ahmed A.Kishk,Fellow,IEEE Abstract—In this paper,a wideband magnetoelectric(ME dipole antenna excited by a slot coupled to a fork-shaped printed ridge gap waveguide is proposed.To enhance the antenna gain,a meta lens consists of three layers of split ring resonators(SRRs are integrated horizontally in front of the ME dipole antenna. Each slab contains a3×7array of SRR unit cells.The matching bandwidth is improved as a secondary effect of the lens.A1×4 array is designed to provide more gain by adjusting the lens between the edge elements of the four-element array.The antenna is fabricated and tested.The measured results show that?10dB S11is obtained between26.5and38.3GHz.The measure realized gain is better than15dBi over the frequency range of28–38GHz. A90%radiation ef?ciency at30GHz is achieved. Index Terms—5G wireless networks,high ef?ciency,high-gain antenna arrays,millimeter-wave antennas,ridge gap waveguide. I.I NTRODUCTION W ITH the rapid development of5G wireless communi-cation systems for Internet of things and video stream-ing applications,it is crucial to design the millimeter-wave antenna operating in the frequency band of(27–38GHz. Proposed antenna is assumed to be embedded in the portable wireless systems such as handset devices,and it should have a good performance regarding the matching,gain bandwidth, high radiation ef?ciency,and low cross-polarization.Most importantly,it is imperative to design a directional fan-beam antenna for portable devices to increase its range and serve more users.A lot of work has been carried out to design a high-gain antenna at millimeter-wave frequency band such as60GHz.For instance,Dadgarpour et al.[1]have integrated the tilted bow-tie radiators with an array of parasitic elements to reach the maximum peak gain of12dB