毕业论文基于MCGS组态软件实现自动门的自动过程控制.doc

毕业设计论文 PAGE PAGE 30 基于MCGS组态软件实现自动门的自动控制 【摘要】： 随着产业自动化水平的迅速进步，计算机在产业领域的广泛应用，人们对产业自动化的要求越来越高，种类繁多的控制设备和过程监控装置在产业领域的应用，使得传统的产业控制软件已无法满足用户的各种需求。 MCGS工控组态软件的出现为解决一些实际工程题目提供了一种崭新的方法，由于它能够很好地解决传统产业控制软件存在的种种题目，使用户能根据自己的控制对象和控制目的任意组态，完成终极的自动化控制工程。 目前自动门应用比较广泛，而其设计一般以PLC为主。由于本人学得较浅，只是从组态编程的角度完成自动门控制，文中不涉及PLC技术的先容，本文主要先容了用组态软件实现自动门的控制，通过先进的从上而下的设计方法，用硬件描述语言描述系统，使系统设计与工艺无关，从而使设计思路更广，设计时间也大大缩短，系统的使用和修改更符合实际。 关键词：MCGS工控组态软件，自动门，控制系统，红外线传感器 Abstract: With industrial automation of rapid progress in the industrial sector, is computer widely used for industrial automation has become onerous, the types of equipment and process monitors the application of the industrial sector, from traditional industries, control software has been unable to meet the needs of users. MCGS industrial control software configuration of the subject of the project provides a new method, since it can be very effective solution of traditional industries are all subject to control software users can, according to their control and control purposes any group of states to fulfil automation control project. the ultimate The automatic doors more widely applied and their design generally, to PLC. Because i have to learn is shallow, but from groups of states in a programming perspective through the door and the plc does not involve the first, this article mainly to allow the use of a group of states in the implementation of the software of control, the advanced from the top of the design in hardware, system and describe language describe the system design and craft, make the design thought more time, design is greatly shortened and systematic use and modify is. Keywords: MCGS industrial control software configuration Door Control system Infrared sensors 目 录 TOC \o "1-3" \h \z \u 前 言 7 1绪论 8 1.1 MCGS组态软件的概述 8 1.1.1 MCGS的概念 8 1.1.2 MCGS组态软件的构成 8 2 MCGS组态软件的简介 10 2.1 MCGS组态软件常用术语 10 2.2 MCGS组态软件的功能和特点 12 2.3 MCGS组态软件的操作方式