CATIA标准件库开发教程演示[汇编].pdfVIP

创建标准件 外接圆直径 D、回转半径 S1、锥顶拔高 S2 为变量参数 添加并设置参数 1. select Knowledge－f (x) 、”New Parameter of type” add D、S1、S2 and evaluated equal to part values 2. select parameters in part and Add Formula like follow, and OK 添加数据库文件 3. Create a Design Table ：select Create a design table with current“ para value” 4. OK then enter “select Parameters to insert choose D, S1,” window, S2 outside 5. OK then savesave as a designtable excel file 6. OK then selectEdit table into… Designtable editor 7. inse