会呼吸的油箱（神钢挖掘机）.pdfVIP

气囊呼吸式防外界污染液压油箱 工作原理： 1、在油箱内安装一随空气吸入与呼出时其内部空间及形状可伸缩自如的气囊。 2 、气囊内空间通过呼吸口与油箱外大气相通。 3、通过气囊将油箱内及液压系统液压油与外部环境完全隔离。 4 、液压系统工作时，油箱内的液面下降产生负压将油箱外空气吸入气囊内，利用气囊体积的增大填补液面下降所形成的空间(见图1)，工作结束时 油液通过回油口回到油箱使液面上升产生正压将气囊内的空气通过呼吸口排出油箱外(见图2) ，在系统工作过程中隔绝了外界空气与液压油的接触， 避免了空气粉尘对液压油的污染及气体对油液的氧化，延长了油液的更换周期,大幅提高了液压系统的可靠性和寿命。 Air breathing type anti external pollution oil tank Working principle: 1. Install air inhaled and exhaled with its interior space and shape can be freely telescopic air bag in the tank 2. The air in the breathing space through mouth and outside of the oil tank is communicated with the atmosphere.. 3. The oil tank and hydraulic system of hydraulic oil is completely isolated from the external environment. 4. The hydraulic system is working, the liquid inside the tank down to generate negative pressure, the outside air of tank into the air bag, the air bag volume increased to fill the drawdown of the space (Picture 1), at he end of the work through the oil return port back to tank the rising liquid to generate positive pressure will air in the air through the breathing outlet outside of the oil tank (Picture 2). In the working process of the system to prevent the outside air and hydraulic oil contact, to avoid the pollution of dust in the air of hydraulic oil and the oxidizing gas to oil, extending the replacement cycle oil, greatly improved reliability and life of the hydraulic system. 工作原理 Working principle 图1 油箱吸气，油液排空，气囊膨胀过程 图2 油箱呼气，油液回流，气囊收缩过程 1.回油口 2.呼吸口法兰座 3.呼吸口螺帽 Tank suction, oil liquid emptying, balloon Tank breath, oil return, airbag contraction 4.气囊气口 5.气囊 6.油箱体 7. 隔板 8. 出油 expansion process 口 1.Oil return port 2.Breathing hole flange seat