Blokset Mx V2.0技术指南 - 图文-.docVIP

V2.0 Blokset Mx 3.1.V1.0 技术指南 3.1.V1.0 Technical Guide 1.概述 (4 General information 1.1 基本规则 (4 Basic rules 1.2 隔间定义 (7 Compartment definition 1.3 分割类型定义 (8 Form definition 1.4 柜体尺寸 Column dimensions 1.5 底板固定 (10 Fixing to ground 1.6 电缆引线 (11 Cable lead-through 1.7 柜体起吊 (12 Hoisting columns 2. 母排 Busbars 2.1 水平母排 Horizontal busbar 2.2 垂直母排 Vertical busbar 3. 开关设备安装 Switchgear installation 3.1 断路器和开关 Circuit breakers and switches 3.2 Blokset Mx马达保护 (34 Motor protection 4. 附件和端子排 (36 Auxiliaries and terminal blocks 4.1 附件和端子排的位置 Position of auxiliaries and terminal blocks 5. 其他 (37 Miscellaneous 5.1 爬距和净距 Creepage distance and clearance 5.2 装配规则 (38 Assembly rules 5.3 标签和标志 (46 Labels and marking 5.4 基于门的形状的IP规则 (46 IPs rules according to shapes on doors 5.5 IP实现 Realization of IP 5.6 电缆特性 Cable characteristics General Information 1.概述 General information 1.1.基本规则 Basic rules 1.1.1. BLOKSET Mx 标志 BLOKSET Mx Signature 如下所列的四个特征,可被看作是Blokset Mx 的标志: 1- 通风挡板的标准颜色RAL7016:该颜色不可更改。 2- 标识必须与功能单元门对齐,位于柜体右上侧。 3- 柜壳金属部件的标准颜色为RAL9002,该颜色可以根据用户的要求修改。 4- 基于以下两方面的原因,必须使用转让文件中描述的门锁- 能够耐受内部电弧。 - 门锁的颜色与标识、通风挡板和把手一致。 1- The standard color of the VENTILATION CROSS MEMBER is RAL 7016: it must not be modified. Four characteristics listed below, are considered as Blokset Mx signature.2- The LOGOS have to be aligned with the functional units doors handles and positioned at the upper right side of the column 3- The standard color of COVER METAL PARTS is RAL 9002. This colour can be changed under customer request.4- The use the door locks described in transfer file is compulsory for 2 reasons:- withstand the internal arc test. - Their colour is the same as LOGOS,VENTILATION CROSS MEMBER and HANDLES. 12 3 4 General Information 1.1.2.模数 Modularity: Blokset Mx 配电柜按照50mm模数的原则设计。所有固定孔均以25mm或12.5mm的距离钻孔,用于 Mx 柜。 阴影区域包括40个50mm的模数。这是安装开关设备和母排的区域: 单水平母排(≤4000A: - 5个模数用于母线设备。 -35个模数用于开关设备。 双水平母排(4000 A: - 8个模数用于母排 - 32个模数用于开关设备 注:垂直母排要安装在前部框架(600X600后部中。Blokset Mx switchboards are designed on the