离心泵cfx流场分析教程.pptxVIP

Workshop 5Cavitating Centrifugal PumpIntroduction to CFXIntroductionThe Purpose of the tutorial is to model cavitation in a centrifugal pump, which involves the use of a rotation domain and the cavitation model.The problem consists of a five blade centrifugal pump operating at 2160 rpm. The working fluid is water and flow is assumed to be steady and incompressible.Due to rotational periodicity a single blade passage will be modeled.The initial flow-field will be solved without cavitation. It will be turned on later. Workbench Start Workbench and save the project as centrifugalpump.wbpjDrag CFX into the Project Schematic from the Component Systems toolboxStart CFX-Pre by double clicking SetupWhen CFX-Pre opens, import the mesh by right-clicking on Mesh and selecting Import Mesh ICEM CFDBrowse to pump.cfx5Keep Mesh units in mClick OpenCreating Working FluidsModifying the material properties:Expand Materials in the Outline treeDouble-click Water On the Material Properties tab change Density to 1000 [kg/m3] Change Dynamic Viscosity to 0.001 [kg m^-1 s^-1] under Transport PropertiesClick OKSetting up the Fluid DomainDouble-click on Default DomainUnder Fluid and Particle Definitions, delete Fluid 1 and then create a new Fluid named Water LiquidSet Material to WaterCreate another new Fluid named Water VapourNext to the Material drop-down list, click the “…” icon, then the Import Library Data icon (on the right of the form), and select Water Vapour at 25 C under the Water Data objectClick OKBack in the Material panel, select Water Vapour at 25 CClick OKSetting up the Fluid DomainSet the Reference Pressure to 0 [Pa]Set Domain Motion to RotatingSet Angular Velocity to 2160 [rev min^-1]Switch on Alternate Rotation ModelMake sure Rotation Axis under Axis Definition is set to Global ZSwitch to the Fluid Models tab, and set the following:Turn on Homogeneous Model in the Multiphase sectionUnder Heat Transfer set the Option to Isothermal, with a Temperature of 25 CSet Turbulence