微软认证模拟试题 Networking Essentials.docVIP

微软认证模拟试题 Networking Essentials Q1. You have a DHCP server and and WINS server.Your are using TCP/IP,You can municate with the work using the IP address, but not when using the servers name. What do you examine first? DHCP server. WINS server Gateway Router Q2. Required: Reduce the utilization by 50% Options: Continue growth Maintain new work utilization. Minimize costs. Proposal: Reduce the packet size from 1514 to 576 bytes. Increase the TCP/IP window size from 4096 to 16384. Replace the Cat 3 cables with Cat 5. Required plus all options. Required plus 2 of the options. Required plus none of the options. Not the required. Q3. You want to monitor and manage hubs, bridges and routers on the work. What do you use? Performace Monitor SNMP implementation Protocol analyzer TDR Q4. 3 Servers using NT. 75 Clients using NetBEUI. You want to connect a UNIX work that uses NFS. Bridge Brouter Router Gateway Q5. You have a work using NetBEUI and TCP/IP. The server and client are in different subs. The client can PING the server, but cannot aess the server using its name. Client and the server have the same IP address Server has the wrong sub mask. Server’s name not registered with the name server. Client’s name not registered with the name server. Q6. You have a work that uses T1 and is connected to the inter. Which backup connection could you use to support e-mail in the event of failure. T3 ATM ISDN Q7. You have 3 branches that you want to connect to the main office. The branches will need 150 meters of cable and the distance between the main office and the branches is 20 miles. The solution was to install UTP in the offices and use fiber optic cable between the office and the branches. I chose would not provide the required result. Q8. Which work topology provides guaranteed aess for each puter on the work? A. star. B. bus. C. ring. D. linear. Q9. Your pany's work uses a 100Mbps backbone. Network traffic is nearly at capacity. Use