气动绞车选型资料.pptxVIP

绞车介绍目录一、JQY型气动绞车二、JQYS型气动绞车三、JCD型电动绞车四、TMYJ型气动马达五、绞车吊架六、气动灯七、气动鼓风机八、公司简介一、JQY型气动绞车1. 概述2.型号说明3.气动原理图4. JQY-2 x 12 、JQY-3 x 12 5.JQY-5 x 186.JQY-10 x 127.JQY-15 x 128.JQY-20 x 129.附表 1.概述JQY系列气动绞车是以叶片式气动马达为动力，通过行星齿轮减速机传递动力至卷筒起吊重物。马达和减速机分别连接卷筒的两侧，绞车的制动是通过马达输出端制动实现的。本绞车具有体积小、重量轻、结构紧凑、操作简单、维修方便、刹车可靠等特点，并可在一定范围内实现无级调速，特别市在没有压缩空气的情况下，可进行手动应急操作。该型绞车已经形成系列化，故选型非常简单，用户只需根据需要，对照参数表值选型即可。另外，用户如有特殊要求，如卷筒容绳量变化等，也可按需定制。JQY series pneumatic winch is a vane type pneumatic motor as driving force to pass power through the planetary gear reducer to the drum for lifting heavy objects. Motor and reducer are connected to both sides of the drum, and the brake of winch is by braking motor which is reliable. The winch can make light weight, compact structure, simple operation, easy maintenance and can do stepless speed regulation within a certain range. In the absence of compressed air can be the case of manual operation.This type of winch series has been formed, so selection is very simple, users only needed in the control parameter selection table can be. In addition, the user if there are special requirements, such as drum capacity change can also be customized on demand.2.型号说明Speed of steel wire ropeRated pullvane typePneumaticWinch3.气动原理图4. JQY-2 x 12、JQY-3 x 12 4.1 简介 JQY-2 x 12、JQY-3 x 12 气动绞车是以叶片式气动马达为动力，通过行星齿轮减速机传递动力至滚筒起吊重物。马达和减速机分别连接滚筒的两侧，使绞车体积小、重量轻、结构紧凑、操作简单、维修方便，在一定范围内可实现无级减速，绞车的制动是通过减速箱本身制动实现的，刹车可靠。在没有压缩空气的情况下可进行手动操作。4. JQY-2 x 12、JQY-3 x 124.2绞车参数表气动绞车参数表Technical Parameter of Pneumatic Winch型号TypeJQY-2×12JQY-3×12起重量(Kg)S.W.L.(Kg)200300起升速度(m/min)Hoisting speacity(m)0-150-15钢丝绳直径（Φ）×容绳量（m）W.P.DIA(Φ) ×Capacity(m)6×456×45马达功率（Ps）×额定转速（rpm）Air motor(Ps) ×(rpm)2×40002×4000额定工作压力(KPa)Air pressure0.60.6耗气量(m3/min)Gas volume2.12.1马达进气孔(G″)Air input size1/21/2气动绞车重量(Kg)Net weight (Abt.)40434. JQY-2 x 12、JQY-3 x 124.3实物图5.JQY-5 x 185.1技术参数起重量：500kg校验重量：625kg绳速：12m/min(3层)钢丝绳：Φ8（18x7)x50m气动马达型号：3Kw x 800rpm空气压力：0.5-0.7Mpa手柄力：约（ab）7.8Kgf整机重量：96kg5.JQY-5 x 185.2实物图6.JQY-10 x 126.1简介 JQY-