机械原理英文课件：Chapter2.1 Limit and Fits.pptVIP

Hole and Shaft 孔和轴 Hole - designate all INTERNAL features of a part, including parts which are not cylindrical. Shaft - designate all EXTFRNAL features of a part, including parts which are not cylindrical. Any actual size shall not exceed the maximum limit of size or the minimum limit of size, i.e., otherwise, the component is unqualified. （5）Maximum Material Condition (MMC) and Maximum Material Size (MMS):最大实体状态和最大实体尺寸 the maximum material condition is a feature where contains the maximum amount of material within the stated limits of size Maximum material size (DM, dM)最大实体尺寸: is the lim