机械原理英文课件：chapter2.3 measurement basis.pptVIP

4.1 Acceptance of principles and methods 验收原则及方法 Mis-acceptance: during the testing process, the wastes out of tolerance limits are identified as qualified products. 误收：在进行检测时，把超出公差界限的废品判为合格品 Mis-rejection: the qualified products within the tolerance limits are identified as wastes. 误废：把超出公差界限内的合格品判为废品 limits of acceptance and margin of safety 验收极限与安全裕度 Limits of acceptance is the size limits for measuring their eligibility when testing the workpiece sizes. 验收极限是:检验工件尺寸时判断其合格与否的尺寸界限。 Limits of acceptance for hole 孔尺寸的验收极限： Upper limit of acceptance=LMS-A 上验收极限=最小实体尺寸（LMS）－安全裕度（A） Lower