S3-36零件提交保证书（PSW）临时批准附页 Appendix to Interim Approval of PSW.xlsVIP

PSW附页 Appendix to Interim Approval of PSW 序号No. 问题点 Problem 高田（上海）确认完成状态 Completion Status Approved by Takata (Shanghai) 对策（发生+流出) Countermeasures (Occurance + Overflow) □ 建议拒收 Suggest Rejection 临时批准生效期间内防止不良流出对策：Outflow Prevention Measures during Effective Period of Interim Approval: □ 申请临时批准 Apply for Interim Approval PPAP再次提交日期 Re-submission Date of PPAP: 临时批准的终止日期 Terminate Date of Interim Approval 经授权的组织代表签字且加盖公司品质部以上章 Signature of Authorized Organization Representative and Seal of Quality Dept. of Company or Above □ 申请完全批准 Apply for Full Approval 临时批准的终止日期 End Date of Interim Approval: _____________________________________________________________ _______________________________________________________________ 状态（Y/N）Status 零件提交保证书（PSW）临时批准附页 当供方状态不能满足完全批准时，供方可以主动申请临时批准，此时： The supplier may forwardly file an application for the interim approval in case the conditions thereof do not meet the full approval, and under such case: 当供方状态不能满足完全批准，且供方未主动申请临时批准时： Where the suppliers conditions do not meet the Full Approval and the supplier fails to apply for the interim approval forwardly: 日期 Date 责任人 Responsible Person 预定完成日期 Estimated Completion Date 注意事项 Notes 1.1、在PSW上声明/解释或说明栏中注明“临时批准申请,详见PSW附页”，须同时附带PSW附页。 Indicate Interim Approval Application and Refer to the Appendix to PSW for Details in the Declare / Explanation or Instruction column in PSW and attach the PSW appendix if necessary. 1.2、如果零件不符合或不能证明已符合设计记录的规格，须同时附带已得到高田（上海）批准的特采申请书复印件。