AVR多量程电压表的设计.docVIP

说明：在Proteus仿真通过，在实际硬件电路中。程序可能需要做适当的调整。 C程序 #include #include #define uchar unsigned char #define uint unsigned int uint m,n,TEMP,QIAN,BAI,SHI,GE,dang; uchar ledCode[]={0xc0,0xf9,0xa4,0xb0,0x99, 0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e,0xbf}; //******共阳数码管*************// uchar FLAGE; void delay_1ms(void) //1ms延时函数 { uint i; for (i=0;i1140;i++); } void delay_nms(uint n) //N ms延时函数 { uint i=0; for (i=0;in;i++) delay_1ms(); } void AD_set(void) { if(dang==0) { ADMUX |= (1 REFS0); //ADC参考电压为AVcc，ADC结果右对齐，选择通