工程常用英语修订版.docxVIP

  • 5
  • 0
  • 约6.42千字
  • 约 8页
  • 2021-04-03 发布于广东
  • 举报
Document number:PBGCG-0857-BTDO-0089-PTT1998 Document number:PBGCG-0857-BTDO-0089-PTT1998 工程常用英语 结构类(Structure category): 中文(Chinese) 英文(English) 中文(Chinese) 英文(English) 向上抽孔 Up extrude (折弯上)加强肋 Rib 向下抽孔 Down extrude 垫脚 Locator 抽孔 Extrusion 穿孔(通孔) Through hole 色拉孔 Counter sink (Abbr.=C’sink) 底孔 Pilot hole 沉头孔 Counter bore (Abbr.=C’bore) 定位孔 Locating hole 中心冲 Center mark (NCT) 异形孔 Cutout 喷点 Center point (Laser) 通风孔(散热孔) Vent 反折压平 Heming 避位孔 Clearance 向上抽引,抽凸 Up draw forming (Or: Up emboss) 段差 Offset 向下抽引,抽凸 Down draw, formin

文档评论(0)

1亿VIP精品文档

相关文档