设计说明书 便携式电机参数检测装置.pdfVIP

摘要 针对便携式电机参数检测装置的设计，提出了基于光电传感器和 AD 转换技术， 完成了一种基于 AT89S52 单片机平台的电动机参数的软硬件设计。硬件系统包括产 生脉冲信号、处理脉冲信号和显示模块，采用 C 语言编程，该方法的优点是精度高、 结构简单、稳定性高。 在工业建筑中，常常会碰到许多要测量电机参数的地方，比如在电动机、卷扬 机、发动机等装置的检测、运作和掌控中，经常要用到持续测量或分时和显示其转速 和效率。要测电机参数，首先要解决是采样问题。在本设计中采用了 ITR9608 光电开 关用于采集电机转速信号。使用 ADC0809 转换接口测电流电压。为了能精确地测量 转速外，还要保证测量的实时性，要求能测得方法，因此电机参数的测量具有重要的 意义。 关键词：AT89S52 单片机；ADC0809 ；ITR9608 。 Abstract Motor parameters for the design of a portable detection device,Proposed based on photoelectric sensors and AD conversion technology, the basic principle of complete hardware and software design based on AT89S52 microcontroller platform motor tachometers. Hardware system includes a pulse signal generation, pulse signal processing and display module, using the C programming language, high accuracy ，the method is simple, good stability. In industrial buildings, often encounter many local motor parameters to be measured, for example, in testing, operation and control of electric motors, winches, engines and other devices, the regular use of continuous measurements or time-sharing and display its speed and efficiency. To the parameter of electric machine , we must first solve sampling problems. In this design uses a ITR9608 photoelectric switches for motor speed signal. Using the measured current and voltage conversion interface ADC0809. In order to accurately measure the speed, but also to ensure the real-time measurement of the parameter of electric machine can be measured by the method, and therefore the parameter of electric machine is of great significance. Key words: AT89S52 microcontroller; ADC0809; ITR9608 目 录 第 1 章 背景 1 1.1 设计背景 1 1.2 研究内容1 1.3 本章小结 2 第 2 章系统方案 3