- 11
- 0
- 约4.2千字
- 约 7页
- 2021-07-11 发布于辽宁
- 举报
MSF的接收和发送数据流程
一.概述:
The Media and Switch Fabric (MSF) In terface是 IXP23XX 与物理层设备 (physical layer device)、交换结构 (switch fabric)的接口单元。
MSF的特点:
?有相互独立的数据接收接口和发送接口( Receive In terface 和
Tran smit In terface ),每个接口可以独立配置,接口总线宽度为32bit
?可配置的总线接口:可配置为一个32-bit,或被分为几个独立的总线:
2个16-bit或4个8-bit,或16-bit+2 x18-bit (项目采用这种配置) ?通过UTOPIA 和POS_PHY协议与PHY相连,通过CSIX与交换结构 (SF)相连;
Note: UTOPIA always refers to cell transport;POS-PHY refers to variable-le ngth packet tran sport.
项目中采用的是POS-PHY格式
POS-PHY Levels 2 and 3—Supported Specifications
Specification
Bus Width
Frequency
POS-PHY Level 2
16 bits
50 MHz
POS-PHY Level
原创力文档

文档评论(0)